Radon Mitigation Frequently Asked Questions
Are there other benefits to a Radon Mitigation system other than the removal of radon?
Do RRNC and Passive Systems Reduce Radon?
Are there special considerations for my home?
What is the cost of running a mitigation system?
How much is a typical Radon mitigation system?
What increases the average cost of installing a radon system?
Are Radon systems noisy?
What about sealing my basement?
What about system maintenance?
Are there other benefits to a Radon Mitigation system other than the removal of radon?
An active radon reduction system reduces the entry into the home of radon, other soil gases and moisture, making the home healthier and reducing the likelihood of moisture-related new-home problems such as warping wood, odors and mold or mildew. After installing an active radon system, a certified radon mitigation contractor will provide a radon reduction guarantee. An active system:
- Improves indoor air quality
- Reduces radon, moisture, odor, allergens
- Provides a more comfortable living environment
- Adds more livable space
- Preserves the building's structure
- Protects interior fit and finish
Do RRNC and Passive Systems Reduce Radon?
A passive system or RRNC might provide a small reduction in radon levels because of the natural convection of heat rising within the home, (stack effect), but an active system will reduce radon in nearly every new home. The risk to homeowners when they buy a home with RRNC or passive system is that both terms give the impression that a home is safe from radon. A home with RRNC or a passive radon system is a great step forward but not guaranteed to resist radon until activated with an inline fan.
These two simple and relatively inexpensive additional steps will make a passive or RRNC system active:
1. Add a radon fan.
2. Test the radon level.
Are there special considerations for my home?
- Homes built since the 1980s
Frequently have a gravel bed under the concrete slabs, which creates a great opportunity for air flow. System design in these homes is almost exclusively aesthetics and the fan choice is a very energy efficient, lower suction fan.
- Homes built before the 1970s
Likely these have slabs poured directly onto soil, frequently compacted soil, or clay, which may lead to decreased air flow and special mitigation considerations. These special needs have a larger effect on system design and may benefit from the use of a high suction fan.
- Slab areas greater than 2,000 + sq feet.
These homes may require special design considerations, and system design may include or combine, larger piping, multiple penetrations or multiple systems. Fan selection is based upon both the pressure field extension and sub slab materials.
- Multiple slab homes
More often than not, proper mitigation will require addressing the whole building. If the home has more than one foundation type or level, (or crawl space) the system design may need to incorporate the full slab with additional pipe extensions into other slab areas.
-Top of Page-What is the cost of running a mitigation system?
Radon fans run continuously, however, with proper installation, design, and sealing of the basement slab. Most system's average energy cost should be less than $50 a year.
We maximize energy efficiency by creating the best possible airflow under the slab, and by sealing basement floor cracks.
-Top of Page-How much is a typical Radon mitigation system?
A standard professionally and aesthetically installed quality radon mitigation system ranges from $1500-1800. This price range is based on factors such as such as the building structure and the ease of airflow underneath the concrete slab.
-Top of Page-What increases the average cost of installing a radon system?
If the home requires excessive sealing, larger more expensive fans, extra suction holes, or the treatment of a crawl space, the system price will increase accordingly, with crawl spaces bringing the largest price change.
-Top of Page-Are Radon systems noisy?
Most radon systems are barely audible, however design considerations may be necessary to limit noise transfer from the radon system into the interior for some of the higher air flow fans. If noise is a concern, please consult a professional NRPP certified Radon Mitigation Technician about noise before making a decision on system design.
-Top of Page-What about sealing my basement?
"EPA does not recommend the use of sealing alone to reduce radon because by itself, sealing has not been shown to lower radon levels significantly or consistently."
With this in mind, sealing areas that are open to soil exposure is still a component when reducing radon. Closing these barriers between the soil and living spaces help to create a vacuum under the home.
Even with thorough efforts to seal these openings, substantial leakage can exist that is not visible to the eye. Over the years, new settlement cracks can also appear causing more leakage areas.
Below are typical leakage areas and effective ways to seal these openings:
| Item | Materials |
| Sump Cover: | Custom, non-breakable plastic disc with an air tight seal |
| Accessible floor-wall joint: | Polyurethane caulking |
| Tiny "hair line" cracks: | Typically not cost effective or meaningful |
| Misc. cracks & openings: | Polyurethane, expanding foam, mortar |
| Drains: | Air traps specific to the radon industry |
| Open Earth: | Poly sheeting placed over open earth and secured/sealed to walls |
What about system maintenance?
Most ASD, (active sub-slab depressurization), radon systems are virtually maintenance free. The only moving part is the fan and the system should maintain effectiveness for as long as the fan is running.
-Top of Page-